We currently have many Fanuc Robodrills with different versions of Fanuc controllers. We do not have 4th axis's on any machines which cause us to do a lot of fixturing and bringing the machine to the home position then stopping the program with a M0 command, and moving the part to the next positi...
We are setting up tool life management (TLM) on one of our Matsuura HPlus-630 Fanuc 31i. We don't need redundant tooling so we are not planning on using the group TLM. We're going to use the TLM on the tool manager page. We would like to put a notify value and have the machine throw a user messag...
The machine is a Hartford HCMC-2082 with fanuc 32i with the G54.2 rotary table dynamic fixture offset ( rtdfo ) function.
Expand Bumping this as I just tried this on our Mitsubishi with an 18i-MB and I wasn't successful. When I run the main program, I get an "071 data not found" alarm. Any ideas? For what it's worth, this is also the only fanuc control I've ever touched where I can't start a program and go into edit mode to move wherever I want in the program. I have to use GOTO statements for mid-starting ...
Hello everyone I am working with a Fanuc Robodrill equipped with a rotary table (4 and 5 axis) and I have to mill a part taking into account that this milling must be performed along the perpendicular direction of the flat upper surface of the part. In order to do it, The machine is equipped with...