Roosa Master / Stanadyne Diesel Injection Pump seal kit 24370 for DB2 automotive I did read here a post from Gastrap here is the postThere's a rubber ring that holds the governor basket onto its drive plate. It disintigrates and contaminates the pump. If it runs this way too long it will destroy the pins on the 2 steel parts.
Sorry if this is viewed as a double post (I posted the list in my M1009 suddenly died thread) but I think this information might be helpful to people with injection pump issues. Below is a list of Stanadyne DB2829 pumps which can be helpful. In general think of GM having 2 pumps a year. One is...
I've seen this device mentioned in several of stanadynes documentation about their injection pumps. Its a mechanical linkage that can override the fuel shutoff solenoid. I think it'd be pretty cool to have on a cucv, it could make a 6.2/6.5 and entirely mechnical engine, not a single wire...
For a long time the 7.3 and 6.9 DB2 injection pump has been a "magic box" that you didn't mess with other than some fuel screw adjustments. This guide will help you to get the most out of your stock pump, without dropping the coin on a modified pump. *Before making any of these adjustments, it...
Tried to change the main shaft seals on my Injection pump due to it leaking fuel from the pump weep hole. Bought the seal rebuild kit and replaced seals that looked worn put it back together just installed and tried to start it without the intake manifold connected to be able to see if there are...